Flat Roof Sealants: DIY Hacks You Can’t Miss

Flat roof sealants are one of the best things to happen in Toronto roofing industry and beyond. When you think of roofing supplies that help extend the durability and functionality of your roof, you can’t miss sealants. However, there is more to have sealants. Being able to pick on some DIY hacks and apply sealants yourself crowns it all.

For homeowners who have a flat roof over their buildings, some DIY sealant hacks will save you some cost. When done correctly, it will prevent debris, moisture and water from damaging your structure. This can be quite a detailed project, but then, you can pull it off successfully.

Here are some steps that you can follow to seal your flat roof properly.

1.      Find the Troubled Spots

When it comes to flat roof sealants, it’s easier to apply on new roofs than older ones. The reason is not far-fetched. Older roofs, in most cases, will need major repairs other than mere sealant application. Firstly, climb up to your roof and check all seams. Find the ones that don’t seem to be attached firmly. Gently slide a blade underneath the lip and check if there is any restriction. If your blade moves freely, then there will be a need to seal this area. With spray paint, you can mark out areas that require flat roof sealants.

2.      Prepare the Area to apply Flat Roof Sealants

Flat roof sealants don’t often stick properly to unclean surfaces. This is why it’s advisable to prepare the area of application and make it clean. Get a broom and sweep off all debris and dispose of them in garbage bags. After that, scrape off gravels on the roof to reveal the area you’ll work on.

3.      Do the Repairs

Before you apply the flat roof sealants, you need to check and repair damages if any. If your roof has issues, get a trowel and introduce some roofing cement over the affected areas. You can go as far as 6 inches beyond the particular spots you wish to repair. Pressure-smooth the cement over the area and ensure the damaged spots are properly filled.

4.      Do the Roof Sealing

At this point, all damaged areas must have been patched. You can now work on the roof to apply cement all over the roof. Start from one of the far edges and apply the roofing cement down to the roof end close to the ladder. Using a trowel, spread it properly, ensuring the cement application is even.

5.      Clean the Flat Roof Sealants

Once you’re done sealing, you’re just a few steps away from making your roof work like what it used to be. After the concrete must have dried, get a bucket of cleaner (alcohol-based), and a mop to your flat

Leave a Comment

© All rights reserved by Universal Roofs

Sitemap, Privacy Policy

Pay your bill securely with Paypal here

Read reviews for high-quality replacement roofing and asphalt shingles:

5 ★★★★★

5 out of 5 stars (based on 500+ reviews)